Torque Common Basic FAQ Common to All Models
Frequently Asked Questions Common Items
Accuracy & calibration
- The relationship between Factor and Zero of a phase difference torque detector (temperature characteristics)
- calibration period of the torque detector
- N - 0 Characteristic Correction Function
- Digital display torque accuracy
rotation direction
- I want to test the rotation direction in a left-right cyclic manner; how long does it take to switch between CW and CCW?
- The power wiring method for changing the rotation direction of the motor included with the DD series torque detector is
- The wiring method for changing the rotation direction of the motor included with the DSTP series torque detector is
- I want to control the switching of the rotation direction of the torque detector from an external source.
- How to check the rotation direction of the motor included with the MD series torque detector.
- How to check the rotation direction of the motor included with the SS series torque detector.
- The relationship between switching between CW/CCW and the polarity of display/voltage output.
- How to check the rotation direction of the motor with a torque detector.
unit
- How to set the TS series torque meter to display in N·m instead of kgf·m.
- To determine torque from the motor rating.
- How to change the display settings of the TS series torque meter from Nm unit system to kgfm unit system.
- N·m / kgf·m / kgf·cm / gf·cm / mN·m torque unit conversion calculation form
- Coupling selection and centering accuracy.
installation
- Coupling and centering work
- Wiring work and noise.
- How to remove rust prevention material from the torque detector shaft?
- Why is the axis of the torque detector yellow?
- Is it acceptable to install the detector vertically? What precautions should be taken during the installation?
Others
- Can one display be used to switch between the signals of two torque detectors?
- Adjustment of matching and accuracy due to changes in the length of signal cables.
- Is the ground for the input and output signals common?
- Changes to the model name and appearance of the MD series torque detector.
- Using the SENSING terminal of the DC power supply for the test motor will trigger an alarm on the DC power supply.
- What is the connection cable between the torque detector and the torque calculation display?
- What happens if the drive side of the torque detector is installed in reverse on the load side?
- Bending radius of TS cable
- The torque, rotation, and voltage output response of the TS-410.
- Regarding external switching for the motor of the MD type torque detector.
- The torque detector is making a squeaking sound, but is there any problem with the measurement?
- Regarding external switching for the motor of the SS type torque detector.