Skip to main content

Select your region & language

Global

Region

On-vehicle Flow Meter
DF-2200

Dimensions: 170(W)×49(H)×120(D) mm, approximately 800 g, making it compact and lightweight for easy installation in vehicles.
It comes standard with CAN output, essential for actual vehicle measurements, providing real-time output of instantaneous flow, temperature, and pressure to CAN loggers, etc.
Connect the LC-0860 CAN interface cable (sold separately) to the CAN communication connector located on the back panel of the DF-2200 vehicle-mounted fuel flow meter.
By accelerating internal sampling and providing an exponential averaging function for analog output, it outputs averaged data from transient measurements as needed.
By pre-entering the reference density value into the DF-2200, real-time mass flow conversion is performed. The HOLD function, auto-stop function (optional), and averaging processing of displayed data have been significantly enhanced.
It supports a wide range of test vehicles from passenger cars to trucks. *AC adapter (optional) supports AC 100–240 V.
(*Excluding FP-5000 series high-resolution specifications and FP-5150 series)

Features

1. Compact design suitable for in-vehicle use.

Dimensions: 170 (W) × 49 (H) × 120 (D) mm, approximately 800 g, making it compact and lightweight, easy to carry in a vehicle.

  • 1. Compact design suitable for in-vehicle use No.1
  • 1. Compact design suitable for in-vehicle use No.2

2. Standard equipped with CAN output.

The essential CAN output for actual vehicle measurement is standard equipment.
It outputs instantaneous flow, temperature, and pressure in real-time to CAN loggers and more.

CAN system configuration

Connect the LC-0860 CAN interface cable (sold separately) to the CAN communication connector located on the back panel of the DF-2200 vehicle-mounted fuel flow meter.

  • CAN System Configuration No. 1
  • CAN System Configuration No.2

3. Enhancement of measurement functions.

The internal sampling speedup and the exponential averaging function for analog output allow for arbitrary output of averaged data from transient measurements.
By pre-entering the reference density value into the DF-2200, real-time mass flow conversion is performed.
The HOLD function, auto-stop function (optional), and averaging processing of displayed data have been significantly enhanced.

  • 3. Enhancement of measurement functions.

4. Compatible with power supply DC 10 to 28V

It supports a wide range of test vehicles from passenger cars to trucks.
* It is compatible with AC 100-240 V using an AC adapter (optional).

  • 4. Power supply compatible with DC 10-28V No.1
  • 4. Power supply compatible with DC 10 to 28V No. 2
    LC-0082 Battery Power Cable (Accessory)

System Configurations

Applicable detectors

  • Compatibility Detector No.1
    (Excluding the FP-5000 series high-resolution specifications and the FP-5150 series)
  • Compatibility Detector No.2

Specifications

General Specifications

Power Supply Battery connection: DC10 to 28 V
When using AC adapter (optional): AC100 to 240 V 50 / 60 Hz
Power consumption 28 VA or less (at DC 12 V)
usage environment indoors, inside a vehicle
height below an altitude of 2000 meters
Operating temperature range 0 to 50 °C *The operating temperature range for the AC adapter is 0 to +40 °C.
Storage Temperature Range -10 to 60 °C
Humidity range 5 to 80 %
Storage Humidity Range 5 to 85%
external dimensions 170 (W) × 49 (H) × 120 (D) mm
Weight 約800 g
safety IEC61010-1: Overvoltage Category II, Installation Category II, Pollution Degree II
• When using optional AC adapter
Applicable Standards Low Voltage Directive 2014 / 35 / EU standard EN61010-1 (when using AC adapter)
EMC Directive 2014 / 30 / EU standard EN61326-1
RoHS Directive 2011 / 65 / EU standard EN IEC 63000
Applicable detectors FP series (excluding the high-resolution specifications of the FP-5000 series and the FP-5150 series), MF-3200
Accessories Battery power supply cable (equivalent to LC-0082), rubber feet, instruction manual

Options

Model name Product name Remarks
DF-0221 auto stop function Automatic Accumulation Stop
DF-0222 RS-232C communication function When DF-0222 is selected, CAN communication becomes unavailable, and it is also not possible to select DF-0225 simultaneously.
LC-0860 CAN interface cable CAN communication cable connector specifications (D-Sub / 9-pin / male connector (body side))
DF-0223 Remote Box for DF  
DF-0224 Output acceleration function Standard 10 ms → Capable of high-speed output at 1 ms
DF-0225 CAN cumulative value output function * Simultaneous selection of DF-0222 and RS-232C is not possible.
PS-P20023 AC adapter *Power cable not included.
  AC adapter power cable
(for domestic use in Japan)		 VPS-P20023 with VM1391-VM1700 (2 m) for domestic use.
CT-0673 panel mounting bracket For shared use of CT-6700
CT-0675 Protection Handler For shared use of CT-6700
CT-0676 light-shielding hood For shared use of CT-6700
Inquire about this product.

Download

Product Brochures

Outline Drawings

Instruction Manuals

最終更新日:2023/12/26