Volumetric Flow Detector
made-to-order
FP-5000シリーズ
Achieves accurate flow measurement from low flow to high flow across a wide range.
The evaluation of the engine has shifted from steady-state tests to transient tests such as exhaust gas modes and performance evaluations to determine the mode-integrated fuel economy. An assessment of fuel consumption characteristics during transients is required. To accurately capture the flow rate changes during transients with good responsiveness, the pulse resolution has been finely tuned and made high-resolution.
Additionally, in the case of alcohol fuels, the flow rate increases due to the lower calorific value. To measure this, alcohol standard compatibility and wide-range capability have been achieved.
Case: Comparison Test of Injector Accumulation Variation
-
Supports a wide range of applications from idling to wide-open throttle. -
Add wide range and high resolution type.
| Standard type | Small flow type | Medium flow type | Large flow type | |
|---|---|---|---|---|
| Type (Series) | FP-5130 Series | FP-5140 Series | FP-5150 Series | |
 |
 |
 |
||
| Usable liquid | Gasoline, diesel, kerosene, alcohol biofuel, general petroleum-based hydraulic oil (Note 1) | |||
| Measurement range | Flow Rate Measurement | FP-5131 / 5132:0.05 to 60 L/h FP-5133 / 5134:0.05 to 108 L/h （Note 2） |
FP-5141 / 5142:0.3 to 300 L/h FP-5143 / 5144:0.3 to 600 L/h |
FP-5151 / 5152: 1 to 1440 L/h |
| Accuracy | Flow Rate Measurement | ±0.0009 L/h or less (0.05 to 0.18 L/h) ±0.5 % of reading (0.18 to 108 L/h) |
±0.2% of the reading value | ±0.5 % of the reading value |
| Pressure loss | Below 8 kPa (40 L/h <gasoline>) |
Below 2 kPa (<60 L/h <gasoline> ) |
7.5 kPa or less (<500 L/h <diesel> ) |
|
| Operating temperature | Liquid | 0～+65 °C | 0～+65 °C | 0～+65 °C |
| Environment | 0～+65 °C | 0～+65 °C | 0～+65 °C | |
| Connection diameter | Size | IN：Rc3/8（※3） OUT：Rc3/8（※3） |
IN：Rc3/8（※3） OUT：Rc3/8（※3） |
IN：Rc1/2 OUT：Rc1/2 |
| Pressure resistance | 1 MPa | 1 MPa | 3.4 MPa | |
| Temperature and Pressure Block | EH-0830A | EH-0830A | EH-0850A | |
| Measurement range | Temperature | 0～+100 °C | 0～+100 °C | 0～+100 °C |
| Pressure | 0 to 1 MPa | 0 to 1 MPa | 0 to 1 MPa | |
| Accuracy | Temperature | Pt100 Class A | Pt100 Class A | Pt100 Class A |
| Pressure | ±0.5 %F.S | ±0.5 %F.S | ±0.5 %F.S | |
| Weight | 約3.5 kg | 約5 kg | 約13.5 kg | |
| Accessories | Instruction manual, line filter (EH-1130 or EH-1150), mounting brackets (mounting brackets tailored to options are included for FP-5130 / 5140 series) |
|||
| Cable | Option specifications FP-0015 (5 m), FP-0016 (10 m), FP-0017 (20 m) | |||
| Applicable flow meter | Various digital flow meters FM-2500A / DF-0400A (*High resolution specifications (FP-5132, 5134, FP-5142, 5144), and not compatible with FP-5152) DF-2200 (*High resolution specifications (FP-5132, 5134, FP-5142, 5144), and not compatible with FP-5151, 5152) FM-3100 / FM-0311A |
|||
| Filter Element | ||||
| filter | EH-1130 | EH-1130 | EH-1150 | |
| element | EH-0031A | EH-0031A | EH-0051A | |
The Volumetric Flow Detector FP series may experience fluctuations in the instantaneous flow rate values of the flow meter under the following usage conditions. Please be cautious.
-
If the inlet pressure of the flow detector is lower than the pressure loss.
-
When using the exit side of the detector open to the atmosphere.
(Note 1) Please consult your nearest sales office.
(Note 2) Flow meter measurement range starting from 0.02 L/h is also available. Please consult your nearest sales office.
(Note 3) Optional fittings (SAE fittings) are also available. Please consult your nearest sales office.