3-channel sensor amplifier
PS-1300
The PS-1300 can be used as a 3-channel sensor amplifier in combination with a Tri-axial Accelerometer, and by using each channel independently, it can also be connected to single-axis type Accelerometers.
The PS-1300 features a built-in integration function, allowing it to optimize input signals to the connected vibration data analysis equipment.
| Number of Channels | 3 | ||||||
|---|---|---|---|---|---|---|---|
|
Frequency response characteristics
|
* However, the value of 160Hz is set to 0 dB. |
||||||
|
Accuracy
|
(at 160 Hz, 25 ℃ ± 3 ℃) |
||||||
|
input connector
|
miniature connector
|
||||||
|
Input Voltage Range
|
± 5 V max
|
||||||
|
Input conversion noise
|
100 μVrms
|
||||||
|
Output Connector
|
C02 (BNC)
|
||||||
|
rated output voltage
|
±5 V max
|
||||||
|
Constant current power supply
|
2.4 mA ± 20 %
|
||||||
|
output impedance
|
approximately 50 ohms
|
||||||
|
load impedance
|
more than 50 kΩ
|
||||||
|
Gain
|
|
||||||
|
Filter
|
HPF: through, 3 Hz, 10 Hz (3rd order Butterworth type -18 dB/oct)
LPF: through, 1 kHz, 10 kHz (3rd order Butterworth type -18 dB/oct) (10Hz, 1kHz comply with "Requirements for Vibration - Measurement of Vibration Severity" <JIS B 0907-1989>) |
||||||
|
Power supply voltage
|
10 V to 15 V DC (can be used with AC 100 V using a separately sold AC adapter)
|
||||||
|
Current Consumption
|
Below 300 mA (at 12 VDC input)
|
||||||
|
usage environment
|
-10℃ to +50℃, below 90% RH (without condensation)
|
||||||
|
link
|
Up to three devices per one AC adapter.
|
||||||
|
Outline Dimensions
|
92 (W) × 121 (H) × 194 (D) mm (excluding protrusions)
 |
||||||
|
Weight
|
1 kg
|
||||||
|
Accessories
|
Joint cable, stabilizer, connecting fittings (2 pieces), rubber feet (4 pieces)
|
||||||
|
Price
|
|||||||
|
Option
|
Device Options
|
*If options are to be installed after the main unit has been delivered, an additional installation fee will be required.