Skip to content

Select your region & language

Global

Region

Photoelectric reflection type fiber sensor amplifier
FG-1300

FG-1300 / FS-5500 (sold separately)
FG-1300
FG-1300
FS-5500 / FS-540
FG-1300 / FS-5500 (sold separately)

The FG-1300 fiber sensor amplifier is a high-performance amplifier for non-contact rotation detectors that emits red visible light from its built-in LED and detects the reflected light that returns after hitting a rotating object. It is used in combination with the dedicated detector FS-5500* / FS-540 opto-fiber sensor. The FS-5500* / FS-540 opto-fiber sensor employs an environmentally resistant design in which glass fiber is encased in a stainless steel flexible tube. It is extremely effective as a detector for measuring the rotation of thin shafts of micromotors and rotation in confined spaces. *A thin sensor has been added to the FS sensor, enabling measurement of workpieces and measurements that were difficult with conventional models.

Features

FG-1300 Fiber Sensor Amplifier

  • Capable of measuring up to a maximum response frequency of 10 kHz, even for detecting high-speed rotating objects.

  • Using red visible light, detection is easy even when measuring objects where optical axis positioning is difficult, such as thin shafts.

  • 微小の光量変化でも検出、反射マーク無しでの計測も可能
    信号のゲイン／トリガレベル設定は、ボリュームを使用した手動調整、オートトリガを使用した自動調整を用意、計測用途に合わせた調整方法の選定が可能

  • Two measurement distance settings are available: normal and close range. Detection is possible from close range up to a maximum of 69 mm (when using reflective marks).

  • It is possible to divide unevenly spaced pulses into a single pulse, which may be detected when measuring without reflective marks.

FS-5500 Optofiber Sensor

Suitable for small workpieces

Capable of detecting rotation in small spots such as 2 mm pitch zebra tape, turbine blades, and small motors.

High resolution

It can be used as a sensor for crank angle detection, tracking analysis, and balancing measurement, where high resolution is required.
Ideal as a detection unit for FFT tachometers, DS, CF, etc.

Vehicle measurement, equipment integration measurement

Its slim design and ability to operate in temperatures ranging from -40 to 250°C make it versatile and easy to handle, allowing for rotational speed measurement of engines, axles, gears, and drive shafts in vehicles, and rotation and angle detection in confined spaces and under low and high temperatures in equipment such as parts production lines.

Case Studies

It can be used for a wide range of applications, from rotational measurement to analysis of various rotating bodies.

Case Studies

FV-1500 FVコンバータ

Application/Example

Detection of the presence or absence of minute components

With a Φ2 mm output aperture, it projects precisely onto even the smallest parts. By detecting the amount of reflected light from the smallest parts and determining the level of reflected light using a threshold function, it is possible to easily detect the presence or absence of smallest parts moving along the line.

  • Detection of the presence or absence of minute components

Tablet missing tablet test

By projecting light onto tablets on a production line, it's possible to check for missing tablets based on the difference in reflected light intensity.

  • Tablet missing tablet test

Specification

FG-1300 Fiber Sensor Amplifier

Detection method Detection of the amount of reflected red visible light projected onto the surface.
Light source: Red visible light LED
Light-receiving element: Phototransistor
Maximum response frequency range 10 kHz
Output signal Two outputs: analog and pulsed.
Analog (MONITOR): Detects reflected light and outputs a signal waveform proportional to the light intensity.
Output voltage range: 0 to 10 V
Pulse (PULS OUT): Outputs a signal pulse obtained by shaping the reflected light into a rectangular wave.
Output voltage range: Low level 0.5 V or less, High level 4.5 V or more.
Signal output connector: BNC
Load resistance 10 kΩ or higher (analog, pulse)
Adjustment function Gain: Adjustment volume, measurement distance switching via switch.
Threshold level: Adjustable volume, manual/automatic switching via switch.
Range: Measurement distance can be switched using a selector switch.
Frequency division: The PULSE OUT signal can be divided by a frequency division ratio ranging from 1 to 10.
Peak hold time constant: Selectable from 1 s / 10 s using the switch.
Display Sensitivity check: LED bar graph monitor; Other: Status displayed via LED indicator.
Power supply AC 100～240 V（50 Hz／60 Hz）
<Operating temperature range> 0 ～ 40 ℃
Operating humidity range 5-80% RH (non-condensing)
Applicable standards CE Mark, RoHS
Compatibility detector FS-5500 / FS-540 Opto-fiber Sensor
Accessories Power cable (for AC 100V), instruction manual, rubber feet (4 pieces) x 1 set
Option スタンド（FG-0131）
パネル取付金具（FG-0132）
Outline drawings 144 (W) × 72 (H) × 212 (D) mm

Outline drawings
Weight Approximately 1 kg
price FG-1300 ファイバセンサーアンプ：
Relationship between reflected light and output Relationship between reflected light and output

FS-540/FS-542/FS-5500 Opto-fiber sensor

Opto fiber sensor
(Sold separately) Specifications
  FS-540 FS-542 FS-5500
Detection method Optical fiber reflective type
Fiber tip exit diameter Φ 4 mm Φ 2mm
Fiber length 1 m 2 m
Mounting nuts M8 M4
Operating temperature range -10 ～ 250 ℃ -40 ～ 250 ℃
Vibration resistance - 50 m/ s²
(Frequency range: 10 to 500 Hz)
Tip only
Shockproof - 1000 m/s2
Reference: Distance between the opto-fiber sensor and the object being measured (at an output signal of 1 V)
FS-540/FS-542 GAIN minimum GAIN maximum
Measurement target Matte black painted surface ≒ 7 mm ≒ 14 mm
White copy paper, 12 x 12 ≒ 8 mm ≒ 15 mm
Reflective mark 12 x 12 ≒ 44 mm ≒ 69 mm
FS-5500 GAIN minimum GAIN maximum
Measurement target Zebra Tape ≒ 2 mm ≒ 20 mm
Reflective mark 12 x 12 ≒ 2 mm ≒ 50 mm
Outline drawings FS-540/FS-542

FS-540/FS-542

FS-5500

FS-5500
price FS-540 オプトファイバセンサー（1 m）：
FS-542 オプトファイバセンサー（2 m）：
FS-5500 オプトファイバセンサー（2 m）：
Option ・HT-011 反射マーク（12 mm 角 25 枚取りシート 10 シート1組）：
※ ファイバケーブルは延長可能 （お問い合わせください）
Inquire about this product

Download

Outline Drawings

最終更新日:2025/09/03