| Maximum input charge |
±100,000 pC |
| input connector |
miniature connector |
| charged capacitor |
100 pF, 1000 pF, 10000 pF |
| leak resistance |
10 GΩ, 1 GΩ, 100 MΩ |
| Frequency response characteristics |
| Acceleration |
1.0 Hz ～ 15 kHz ± 0.5 dB
0.2 Hz ～ 50 kHz ± 3 dB |
| Velocity |
3.0 Hz to 3 kHz ± 0.5 dB |
| Displacement |
3.0 Hz ~ 500 Hz ± 1 dB |
(However, 160Hz is set to 0 dB.) |
| accuracy |
| Acceleration |
± 2 % |
| Velocity |
± 3 % |
| Displacement |
± 5 % |
(at 160 Hz, 25 ℃ ± 3 ℃) |
| rated output voltage |
±10 V |
| maximum output load |
3 mA, 1500 pF |
| Output Connector |
C02 (BNC) |
| Input Conversion Noise Level |
below 0.05 pC (rms) |
| Output Offset |
± 5mV or less |
| sensitivity |
0.01 to 999 pC/EU |
| filter |
HPF: through, 3 Hz, 10 Hz (-18 dB/oct)
LPF: through, 1 kHz, 10 kHz (-18 dB/oct)
(10Hz and 1kHz comply with "Requirements for Vibration - Measurement of Vibration Severity" <JIS B 0907-1989>) |
| calibration signal |
160 Hz ± 5 %, 80 Hz ± 5 % 1 V 0-p ± 2.0 % sine wave (25℃ ± 3℃) |
| Maximum Input Warning Display Function |
OFF: When the output exceeds ±10 V, the [-10 dB/Over] indicator blinks red, and it stops blinking when it returns within ±10 V.
ON: When the output exceeds ±10 V, the red blinking continues until the [▲/RST] switch is pressed. |
| Output sensitivity |
| Acceleration |
0.01, 0.0316, 0.10, 0.316, 1.00, 3.16, 10.0, 31.6, 100, 316, 1000 mV/EU |
| Velocity |
0.01, 0.0316, 0.10, 0.316, 1.00, 3.16, 10.0, 31.6, 100, 316, 1000 mV/EU |
| Displacement |
0.10, 0.316, 1.00, 3.16, 10.0, 31.6, 100, 316, 1000 mV/EU |
|
| Auto Power Save |
If there is no input from each switch for more than about 2 minutes, only the decimal point will be displayed on the main display section. |
| other functions |
- Output level indicator: Lights green at -10 dB full scale, blinks red when exceeding full scale.
- Condition Memory: retains settings even when the power is turned off.
- Condition Lock: Prevention of Key Malfunction
|
| power supply voltage |
10 V to 15 V DC (AC 100 V can be used with a separately sold AC adapter) |
| Current Consumption |
Below 120 mA (when 12 VDC IN shows '1.00') |
| link |
Up to 6 devices per AC adapter. |
| Outline Dimensions |
28 (W) × 121 (H) × 194 (D) mm (excluding protrusions) |
| Weight |
approximately 510g |
| Environmental conditions |
-10℃ to +50℃, below 90% RH (without condensation) |
| preserve environmental conditions |
-10℃ to +50℃, below 90% RH (without condensation) |
| Accessories |
joint cable, stabilizer, connecting fittings |
| Price |
|
| Option |
- AC adapter PS-P20022C (PE1821078)
Power cable for overseas (domestic power cable is included with the main unit)
For North America (PE3530083)
For Europe (PE3530085)
For China (CCC), please contact us.
|
