Contact Digital Handheld Tachometer
HT-3200
A compact handheld contact Digital Tachometer that is easy to use and high-performance.
By simply holding it with one hand and lightly pressing it against the rotating shaft, you can obtain direct readings of r/min on the display. Additionally, by combining it with a peripheral speed ring, line speed measurements in m/min or mm/s are also possible.
The measurement range is extensive, from low speeds of 0.5 r/min to 10,000 r/min, with a resolution of 0.1 r/min or 1 r/min for high-precision rotational speed measurements.
(Peripheral speed measurement range: 0.05 to 1000.0 m/min when using the standard peripheral speed ring KS-200, 0.5 to 10,000 mm/s when using the optional peripheral speed ring KS-100)
The measurement results can be saved in the internal memory as a history for up to 10 entries, making it convenient for verification and recording after measurement.
*Please prepare dry batteries by yourself.
| Measurement Department | ||
|---|---|---|
| Rotational speed measurement unit | Lo range: 0.1 r/min, Hi range: 1 r/min |
|
| Rotational speed measurement range | KS-300 usage (included) Lo range: 0.5–2,000.0 r/min, Hi range: 5–10,000 r/min |
|
| Measurement range of circumferential speed | KS-100 Usage (Optional) Lo Range: 0.5–2000.0 mm/s (Resolution 0.1 mm/s) Hi Range: 5–10000 mm/s (Resolution 1 mm/s) |
KS-200 Usage (Included) Lo Range: 0.05–200.00 m/min (Resolution 0.01 m/min) Hi Range: 0.5–1000.0 m/min (Resolution 0.1 m/min) |
| The measurement unit cannot be changed. When using the KS-200, if you divide the measurement value by 10, it will be in m/min units. |
||
| measurement accuracy | KS-300 Usage (Included) Lo Range: 0.5–1249.9 r/min; within ±0.1 r/min 1250.0–2000.0 r/min; within ±0.2 r/min Hi Range: 5–10000 r/min; within ±1 r/min |
|
| Over range display | When the measured value exceeds each measurement range, the displayed value is fixed at the maximum value and the display shows the ERROR mark "ERROR". | |
| detection section | ||
| number of pulses | 60 P/R | |
| Detection element | transmissive photo sensor | |
| Display Section | ||
| Display digit count | 5 digits | |
| character height | 10.5 mm | |
| method of representation | LCD 7 Segment | |
| Display update time | 1 second (Lo range: 0.5–1.0 r/min takes 2 seconds) 1 second (Hi range: 5–10 r/min takes 2 seconds) |
|
| Measurement Mode | ||
| data hold function |
After the measurement is completed, the final measurement value will be displayed for about 30 seconds, and then it will automatically turn off (auto power off). |
|
| Memory function | Up to 10 measurement values can be stored in memory when the MEMORY/COND switch is pressed. Since the same memory values are stored in non-volatile memory, they are retained even when the power supply is cut off. |
|
| General Specifications | ||
| Power Supply | AAA batteries ※ (1.5V) × 3 pieces | |
| continuous usage time | Approximately 20 hours (using alkaline batteries, at 20 °C) | |
| Low Battery Indicator | When the battery voltage drops below approximately 3.3 V, the LOW mark light turns on. | |
| Operating Temperature Range | 0 to +40 degrees Celsius | |
| Storage Temperature Range | -10 to +55 °C | |
| Outline Dimensions | 63 (W) × 172 (H) × 38.5 (D) mm
|
|
| Operating Humidity Range | 35 to 85 % RH | |
| Storage Humidity Range | 35 to 85 % RH | |
| Weight | Approximately 160 g (excluding the battery) | |
| Accessories | KS-300 rotating contactor x2, KS-200 peripheral speed ring x1, instruction manual (Japanese-English) x1 | |
| Price | ||
| Option | ||
-
The KS-200 (1 unit) and KS-300 (2 units) are stored inside the battery cover on the back of the main unit.
-
KS-100 Circumferential Speed Ring (for mm/s)
-
KS-200 Circumferential Speed Ring (for m/min)
-
KS-300 rotating contactor
-
KS-700 extension shaft