Explosion-proof rotary encoder

Made-to-order explosion-proof compliant product (for use in Japan only)

RP-2700シリーズ

Pressure-resistant RP-2700 series (made to order)

● Pressure-resistant explosion-proof type that satisfies explosion class d2G4 (Certification number T68417)
● Even if explosive gas enters the interior and ignites and explodes, the enclosure is designed to withstand the explosion pressure and prevent ignition of surrounding explosive gases.
● Power supply can be selected from AC or DC.
● Ideal for on-site installation and long-distance transmission.
● Cable glands are used at the wire entry point.
● Can replace some of the RP-210 series.

Inquiry

type			Pressure-resistant explosion-proof type
Basic model			RP-2711 / RP-2712 (Made to order)	Reference: RP-210 series (discontinued)

Number of output pulses			60, 100, 300, 360, 500, 600, 1000, 1500, 3000 P/R	60, 100, 120, 200, 300, 360, 500, 600, 750, 900, 1000, 1200, 1500, 1800, 2000, 2500, 3000 P/R (RP-210 series; optional)
Maximum rotational speed			8000 r/min
Mechanical properties	Allowable shaft load	radial	150 N
		thrust	100 N
	Shaft diameter		⌀19 mm
	Starting Torque		50 mN･m *1
	Moment of inertia		1050 g･ ^cm²
	Weight		15.5 kg	17 kg
Environmental characteristics	Operating temperature range		-5°C to +50°C
	Storage temperature range		-20°C to +70°C
	Humidity resistance		95% *2
	Protection class		IP50 *3
	Vibration resistance		98 m/ ^s² *4
	Shockproof		980 m/s ² 5, 98 m/s ² 13
Types of explosion-proof structures			Pressure-resistant explosion-proof structure (symbol d)
The target gas or the above ignition temperature and explosion class			2G4
Electrical characteristics	Output waveform		2 phase square wave	Single-phase/two-phase square wave
	Output voltage		“Hi”: 10 V or more *6 “Lo”: 0.5 V or less	“Hi”: 10 V or more *7 “Lo”: 0.5 V or less
	Duty		50% ± 10%
	phase difference		90°±25°
	Response frequency		100 kHz
	Signal accuracy	Adjacent error	±1/200 pitch or less
	Output method		Totem pole *8
	Connection method		Terminal block *9	Terminal block *10
	Power supply		AC 100-240 V / DC 12-24 V	AC 100V 11 / DC 12V 12
	Current consumption		50 mA (AC) / 100 mA (DC)	50 mA (AC) / 100 mA (DC)
Compatible display model			TM-4000 series, FV-1500
Outline drawings	RP-2711 / RP-2712

※1 オイルシール付回転軸において。
※2 40 °C、8h オイルシール付回転軸において。結露不可。
※3 回転軸にオイルシールを付けている場合に適合。
※4 X、Y方向 2時間、Z方向 4時間。
※5 X、Y方向（各3回計12回）。
※6 電源電圧によらず、出力信号電圧は Hi 10 V 以上
※7 RP-210オプション時：電源電圧 DC 24 Vの場合、出力信号電圧はDC 12 V電源と同様で Hi 10 V 以上。
※8 負荷抵抗 470 Ω 以上。オプションにてオープンコレクタ出力 (DC 40 V、50 mA 以内) も可能。
※9 圧着端子：M4（JIS C2805 RBC1.25-4）
※10 電源供給用圧着端子：M3（JIS C2805 1.25-3）、信号出力用圧着端子：M4（JIS C2805 2-4）
※11 オプションにて AC 110 V、AC 200 V、AC 220 Vも可能。
※12 オプションにて DC 5 V、DC 15 V、DC 24 V も可能。
※13 ±Z方向（各3回計6回）。

The protection class (IP) of the RP series conforms to the Japanese Industrial Standard JIS C 0920 (corresponding to IEC 529) for the waterproof and dustproof properties of electrical machinery and equipment, and specifies the test method by classifying the classes as follows:

example
IP65 ... Dustproof and jet-proof
　Second characteristic digit... Protection against water ingress
First characteristic digit... Protection against foreign solid objects

1st characteristic number	Structure	Test conditions
0	unprotected	――――――
1	Protection for hands, etc.	Prevent solid objects larger than ⌀50 mm from entering.
2	Protection for fingers, etc.	Prevent solid objects larger than ⌀12.5 mm from entering.
3	Protection against tools, etc.	Prevent solid objects larger than ⌀2.5 mm from entering.
4	Protection against wire, etc.	Prevent solid objects larger than ⌀1 mm from entering.
5	Dustproof type	Prevent dust and debris from entering in amounts that would interfere with operation.
6	Dustproof	Prevent dust and dirt from entering.
X	Not specified	――――――

1st characteristic number	Structure	Test conditions
0	unprotected	――――――
1	Protection against vertically dripping water	Dropping water droplets at a rate of 1 mm/min from a height of 200 mm for 10 minutes.
2	Protection against water droplets within a vertical range of ±15°	Drop water droplets at a rate of 3 mm/min from a height of 200 mm for 10 minutes while the case is tilted ±15°.
3	Protection against watering	Spray water at a rate of 10 L/min from a distance of 300 mm at an angle of ±60° for 5 minutes.
4	Protection from water splashes in all directions	Spray water at a rate of 10 L/min from a distance of 300 mm at ±180° for 5 minutes.
5	Protection against water jets	Prevent dust and debris from entering in amounts that would interfere with operation.
6	Protection against powerful water jets	A 100 L/min water jet is applied in all directions from a distance of 2.5 m for 3 minutes.
7	Protection against flooding	30 minutes at a depth of 1 meter
8	Protection in the diving state	Based on consultation between the user and the manufacturer
X	Not specified	――――――

Inquire about this product

terminals	Content
1	signal 1
2	signal 2
3	case
4	Common signal
5	Internal (common for signals)
6	Interior (case)
7	Internal (Signal 2)
8	Internal (Signal 1)
9	AC type: Power supply (L) DC type: Power supply (+)
10	AC type: Power supply (N) DC type: Power supply (-)

terminals	Content
1	signal 1
2	signal 2
3	case
4	Common signal
5	Internal (common for signals)
6	Interior (case)
7	Internal (Signal 2)
8	Internal (Signal 1)
9	AC type: power supply DC type: Power supply (Vcc)
10	AC type: power supply DC type: Power supply 0 V

Explosion-proof rotary encoder

Made-to-order explosion-proof compliant product (for use in Japan only)

RP-2700シリーズ

Specification

Model abbreviation

Connection method

RP-2700 series

Reference: RP-210 series (Discontinued)

What is IP protection rating?

Characteristic 1: Protection against foreign solid objects

Second characteristic: Protection against water ingress

Related Information