試験設備 点検パック

We have packaged the minimum necessary inspections to prevent device malfunctions.

We will implement the following content and issue a checklist.

• Implementation of cleaning
• Appearance Check
• Check of cooling fan for equipment.
• Check for looseness in the connection parts.
  
  
• Check the rotational speed of the dynamometer.
• Check engine RPM
• Check the torque value
• Confirmation of alarm operation

If repairs are needed, additional charges will apply.
Weekdays from 9:00 AM to 6:00 PM, work will be handled for one day.

For detailed inspection contents and amounts, please contact our sales office or our agents.

In addition to preventing equipment failure, we have packaged the calibration of measurement items.
We will carry out the following and issue a test report.

• Implementation of cleaning
• Appearance Check
• Check of cooling fan for equipment.
• Check for looseness in the connection parts.
  
  
• Check the rotational speed of the dynamometer.
• Check engine RPM
• Confirmation of alarm operation
• Implementation of measurement calibration
  *You can select the required items
  1. Temperature, analog input/output, rotational speed, atmospheric pressure – up to 20 items
  2. Pressure (calibration by applying actual pressure) - up to 10 items
  3. Dynamo torque calibration or shaft torque calibration – up to 1 range

It is also possible to add calibration items for measurement. The cost for additional items will be quoted separately.
In the event of repairs, additional charges will apply.
Work will be conducted on weekdays from 9:00 to 18:00 for a duration of two days.

For detailed inspection contents and amounts, please contact our sales office or our agents.