デジタルリニアゲージ用 信号ケーブル・アクセサリー
Signal cable
Signal extension cable (Sensor ↔ Counter)
| Model name | Length | source of connection | Exterior | connection destination | Price | |
| Signal Extension Cable |
AA-8801 | 5 m | BS/GS series linear gauge sensor |
The maximum extension cable length from the sensor is 30 m. |
DG Series Gauge Counter |
|
| AA-8802 | 10 m | |||||
| AA-8803 | 20 m | |||||
| AA-8804 | 30 m | |||||
Flexible signal extension cable * New |
AA-8811 | 5 m | BS/GS series linear gauge sensor |
The maximum extension cable length from the sensor is 30 m. |
DG Series Gauge Counter |
|
| AA-8812 | 10 m | |||||
| AA-8813 | 20 m | |||||
| AA-8814 | 30 m | |||||
| Signal extension cable |
AA-8901 | 5 m | GS-3813B GS-3830B Linear gauge sensor |
|
DG-5100 | |
| AA-8902 | 10 m | |||||
| AA-8903 | 20 m | |||||
| AA-8904 | 30 m |
Connection conversion cable (Sensor ↔ Counter)
| Model name | Length | source of connection | Exterior | connection destination | Price | |
| Connection conversion cable |
AA-8910 | 0.2 m | BS/GS series linear gauge sensor (excluding GS-3800B series) |
 |
DG-5100 |
Signal cable (for output signal conversion box)
| Model name | Length | source of connection | Exterior | connection destination | Price | |
| Signal Cable |
MX-7105 | 5 m | DG-0010 Output signal conversion box |
 |
Open collector output |
|
| MX-7110 | 10 m | |||||
| MX-7115 | 15 m | |||||
| MX-7120 | 20 m | |||||
| made-to-order | 25～30 m | 25m: ¥22,000 (excluding tax) 30m: ¥27,500 (excluding tax) |
||||
| made-to-order | 30～1200 m | DG-0020 Output signal conversion box |
 |
Line driver output |
¥19,000 (excluding tax) ～ for every additional 5 m ¥3,000 (excluding tax) |
BCD cable
| Model name | Length | source of connection | Exterior | connection destination | Price | |
| BCD cable |
AA-8101 | 3 m | DG-4320/4340/ gauge counter |
 |
DA-4130 DA converter*** |
|
| AA-8107 | 3 m | DG-2310 4320/4340 Gauge Counter |
 |
- |
Power cable
| Model name | Length | source of connection | Exterior | connection destination | Price | |
| Power supply cable |
AX-2050N | 3 m | DG-4320/4340/ 5100 gauge counter |
 |
- |
RS-232C cable
| Model name | Length | source of connection | Exterior | connection destination | Price | |
| RS-232C cable |
AX-5022B | 2 m | DG-2310 Gauge Counter |
 |
PC |
* Do not store or use below 0 ℃. (This differs from the sensor's storage temperature.)
** DX30A-36P is a crimp type connector. If you are wiring it yourself, you will need tools for crimp type connectors. We recommend solder type connectors when purchasing.
*** Discontinued
mechanical release
mechanical release
| Model name | suitability gauge | Outline Drawings | amount |
| AA-813 | GS-201*、GS-102* BS-102*/102W*/112*/112W*HS-3412*/3425* DG-525H*/825*/925* |
 |
* Use in combination with the release lifter AA-972.
Finger lift
Finger lift
| Model name | suitability gauge | amount | |
| AA-969 | All models (BS series, excluding waterproof types) |
 |
Air Lift
Air Lift
| Model name | suitability gauge | amount | |
| AA-6102 ＊2＊3 |
GS- 1713/1813/ 6713/6813/ 4713/4813/ 3813 |
 |
|
| AA-6103 ＊2＊3 |
GS- 1730/1830/ 6730/6830/ 4730/4830 /3830 |
 |
*1 The Air Lifter is not subject to protection ratings IP64, IP64G (AA-6100/6101)
*2 The Air Lifter AA-6102/6103 requires an extension spindle, so the total length of the gauge sensor will be 22 mm / 37 mm longer, respectively.
*3 Air piping and ON/OFF solenoid valve are required separately. The distance from the sensor mounting surface to the spindle sensor (9 mm) remains unchanged.
extension spindle
Extension spindle (for measuring the depth of deep small holes)
| Model name | Extension Length | amount | |
| AA-844 | 30 mm |  Material: SUS303 Thickness: ⌀ 3.8 mm Screw part: M2.5 |
|
| AA-845 | 50 mm |  Material: SUS303 Thickness: ⌀ 3.8 mm Screw part: M2.5 |
Measurement tip
Measurement tip
| AA-0200 *1 | AA-0210 | AA-0220 *2 | AA-0230 |
 |
 |
 |
 |
| AA-0240 *2 | AA-0250 *2 | AA-827 *3 | AA-828 *3 |
 |
 |
 |
 |
| AA-0320 | AA-921 | AA-0330 (made-to-order) | AA-0400 |
 |
 |
 |
 |
*1 The measuring elements used in the BS series are not standard measuring elements (AA-0200).
*2 When attaching flat measuring elements AA-0220/0240/0250 to gauges in units of 1 μm or 10 μm, it is recommended to adjust the parallelism with the surface of the measuring table. In this case, it will be paired with the gauge stand. After parallelism adjustment, accuracy: approximately 10 μm or less (according to our measurement method). Parallelism adjustment fee: ¥15,000 (excluding tax) (shipping costs are additional).
*3 When attaching roller measuring elements such as AA-827/828 to gauges in units of 1/1000mm (1μm), the specified accuracy may not be achieved. AA-827/828 uses bearings, but since the gaps are not eliminated, there may be an error of about ±10μm.
Fittings and measurement tip adapters (for replacing tips)
Fittings and measurement tip adapters (for replacing tips)
| Model name | suitability gauge | Price | |
| AA-829 (made-to-order) | GS-102/251/ 503/1000 (All models discontinued) |
 |
dustproof rubber
dustproof rubber
| Model name | suitability gauge | L1 (mm) |
Color outer diameter (⌀ mm) |
Rubber outer diameter (⌀ mm) |
Stem diameter (⌀ mm) |
Material *3 | Price |
| AA-841 *1 | GS-1000 (Discontinued) |
40.5 | 22 | 24 | 15 | CR | |
| AA-973 *1 | BS-1210/1310/ 102/102W/ 112/112W |
- | - | 8 | 8 | EPM | |
| AA-975 *2 | GS-5011 | 8.5 | - | 16 | 20 | NBR | |
| made-to-order | GS-4513/4613/ 4530/4630 *4 (All models discontinued) |
- | - | 10 | 10 | FKM | Product pickup exchange *6 |
| AA-4102 | GS-1713/1813/ 6713/6613 |
- | - | 8 | 15 | Si | |
| AA-4103 | GS-1730/1830/ 6730/6830 |
- | - | 8 | 15 | Si | |
| AA-4104 | GS-4713/4813/ 3813 *5 |
- | - | 8 | 15 | HNBR | 商品引き取り交換*7 |
| AA-4105 | GS-4730/4830/ 3830 *5 |
- | - | 8 | 15 | HNBR | 商品引き取り交換*7 |
*1 Comes with a dedicated measuring probe for dust-proof rubber. (Refer to the outline diagram below)
*2 Comes with a dedicated fitting for dust-proof rubber. (Refer to the outline diagrams above and below)
*3 CR: Chloroprene rubber, NBR: Nitrile rubber, EPM: Ethylene propylene rubber, Si: Silicone rubber, FKM: Fluoro rubber, HNBR: Hydrogenated nitrile rubber
*4 Dust-proof rubber for GS-4500/4600 series (Material: Fluoro rubber) is made to order. In that case, it will be a product exchange.
*5 Dust-proof rubber for GS-4700/4800/3800 series is a product exchange.
*6 Shipping costs are additional.
*7 Installation costs are additional.
| Model name | Fit Gauge / Product Details | |
| AA-841 | With dedicated measuring probe for GS-1000* |
 |
| AA-973 | Dedicated measuring probe for BS series dustproof rubber |
|
| AA-829 | Measuring probe adapter for GS-102*/251*/503*/1000* When attaching a dustproof rubber and combining it with a special measuring probe, the measuring probe adapter AA-829 is required. |
 |
| AA-975 | With a dedicated connector for dust-proof rubber for GS-5011* when combining with a special measuring probe, please attach it directly to AA-975 (dedicated connector for dust-proof rubber). No connector is needed for the special measuring probe. |
 |
mounting hardware
mounting hardware
| Model name | suitability gauge | Price | |
| AA-8560 | GS-5050/5051/5100/5101 |  |
|
| AA-3310 | GS- 1713/1730/ 1813/1830/ 3813/3830/ 4713/4730/ 4813/4830/ 6713/6730/ 6813/6830 |
 |
gauge stand
gauge stand
| Gauge stand model name | ST-022 | ST-0230 *1 | ST-044B *1 | |
| Applicable Gauge | Gauge sensor model name | BS-1210 BS-1310 |
GS-1713A/1730A GS-1813A/1830A GS-3813B/3830B GS-4713A/4730A GS-4813A/4830A GS-6713A/6730A GS-6813A/6830A |
GS-5050A/5100A GS-5051A/5101A |
| Reference | Stem outer diameter ⌀8 mm Stroke 10 mm |
Stem outer diameter ⌀15 mm Stroke 13/30 mm |
Stem outer diameter ⌀15 mm Stroke 50/100 mm |
|
| Table dimensions (mm) | 80 × 85 | 80 × 85 | 105 ×105 | |
| Applicable stem outer diameter (mm) | ⌀8 to ⌀10 | ⌀15 | ⌀15 to ⌀20 | |
| table material | Ceramic (grooved) | |||
| Measurement surface flatness | 1μm | |||
| Surface roughness of the measurement surface | 0.4S lap finish | |||
| Base (width × depth mm) | 100 ×160 | 130 × 200 | ||
| measurable depth (mm) | 約 59 | 約 60 | 約 73.5 | |
| measurable height (mm) | 約 115 | 約 210 | ||
| Weight | 4.1 kg | 4.2 kg | 7.5 kg | |
| Price | ||||
*1 When using a linear gauge sensor with a stem outer diameter of ⌀8 mm mounted on gauge stands ST-0230 or ST-044B, stand bushes AA-891 (for ⌀8 mm) or AA-892 (for ⌀10 mm) are required.
Reference
To install or remove the gauge sensor, use knob (A). To raise or lower the arm, loosen knob (B) and then adjust with knob (C).
spare parts, consumables, etc.
spare parts, consumables, etc.
| Model name | Product Name | use | Price |
| DX40-36P | 36-pin connector (for cable) For BCD signals, for soldering (DX36CV1 required) |
For DG-4120*/4140*/4240*/4280* and DA-4130 | |
| DX36CV1 | Same as above, use plug cover. | for DX40-36P | |
| TA2096 | AC power adapter (cable: approx. 1.8 m) Input: AC 100 V, Output: DC 9 V/300 mA |
For use with DG-525H*/825*/925* | |
| AA-5100 | Thermal recording paper (set of 10 rolls) | For use with RQ-1410* |
Sales Ended
最終更新日:2024/12/13