Skip to main content

Select your region & language

Global

Region

Ultraminiature Microphone
MB-2200M10

The MB-2200M10 Ultraminiature Microphone is a "Ultraminiature Microphone that can be used in spaces where installation was previously difficult, without affecting the sound field." It enables multi-point measurement in "narrow spaces" and installation and measurement near sound sources, which were previously difficult.
Because it uses constant current drive (CCLD), it can be directly connected to and used with FFT analyzers and other devices.

Features

Features

Ultra-compact! Enables sound pressure measurement even in confined spaces without causing disturbances.
Ultra-lightweight! Can also be secured with double-sided tape.
TEDS, CE marking compliant

Case Studies

  •  Sound pressure measurement in confined spaces 

  •  Sound pressure distribution measurement using multiple devices 

  • Measurement of side mirror operation noise

    I've installed it in the gap of the side mirror. It allows for installation in places I previously thought were impossible.

    I've attached it in the gap of the side mirror.
    It can now be installed in locations that were previously considered impossible.

  • Measurement of printer head operating noise

    It is attached to the print head. With the lid closed, it is possible to record the operating sounds of the moving parts.

    It's attached to the print head.
    It is possible to record the operating sounds of the moving parts with the lid closed.

Specification

Response type
Free-field type
Sensitivity (1 kHz)
-37 .0± 3 dB re.1 V/Pa (14 mV/Pa)
Frequency range (based on 1 kHz)
200 Hz～16 kHz （± 2.5 dB）
Maximum sound pressure level
114 dB or higher (1 kHz, total harmonic distortion: 3%)
Self-noise level
36 dB or less (A-weighted)
Operating temperature range
-30 to +80°C; within 2500 mm from the tip of the sensor.
0 to +50°C. (Except for 2500 mm from the tip of the sensor section, up to the connector of the preamplifier section)
Operating humidity range
0-90% RH (non-condensing)
Storage temperature range
-10°C to +60°C (sensor section, preamplifier section)
Storage humidity range
0-90% RH (non-condensing)
Power supply
Drive system: CCLD (Constant Current Drive)
Driving current: 2.2 mA to 4.9 mA (rated 4.0 mA)
Operating voltage: DC 18V to 26V (rated 24V)
Applicable standards
CE marking
EMC Directive 2014/30/EU Standard EN61326-1
RoHS Directive 2011/65/EU Standard EN IEC 63000
TEDS
IEEE 1451.4:2004 Version: 1.0
Template :27 Microphone with built-in Preamplifier
Output connector
C02（BNC)
Outline drawings
Sensor unit: 4.7 (W) x 7.1 (D) x 3.3 (H) mm
Preamplifier section: Φ13.6 x 46.8 mm (including BNC connector)
Cable (including bushing) 2850 mm
Weight
Approximately 48 g (product) / Approximately 0.3 g (sensor part only)
Accessories
Datasheet: 1 copy
Instruction manual: (Japanese and English) 1 copy each
price
 

Option

MB-0210 Ultraminiature Microphone calibration Adapter
  
Overview
MB-0210 Ultraminiature Microphone calibration Adapter
Image of the SC-2600 acoustic calibration attached.
Image of the SC-2600 acoustic calibration attached.
 

Note: The MB-0210 is to be used in conjunction with the SC-2600 or SC-2120A acoustic calibration.
calibration values cannot be guaranteed when used in combination with other acoustic calibration.
price
 

Related Products

Recommended Sound Calibrators (SC-2600 / SC-2120A)
Overview
SC-2600
SC-2600
SC-2120A
SC-2120A
This acoustic calibration conforms to JIS C 1515. See details.
*A dedicated Ultraminiature Microphone microphone calibration adapter (MB-0210) is required when calibration Ultraminiature Microphone microphones.
price SC-2600 音響校正器（クラス1）:
SC-2120A 音響校正器（クラス2）：
SR-2210 2-channel Sensor Amplifier
Overview SR-2210 2-channel Sensor Amplifier

This is a 2-channel sensor amplifier for inputting constant-current driven sensors into analyzers and recorders such as DATs that do not support constant-current amplifiers.
price
 
Inquire about this product

Download

Product Brochures

最終更新日:2024/05/13