Magneto-Electric Rotation Detector MP-9810/MP-9830
Magneto-Electric Rotation Detector MP-9810/MP-9830 FAQ
- Operating Principle of MP-9810 / MP-9830 Magneto-Electric Rotation Detector
- MP-9810 / MP-9830 Magneto-Electric Rotation Detector: Why does the duty cycle change?
- Method of fixing for MP-9810 / MP-9830
- About the output cables for MP-9810 / MP-9830
- To branch the signal of MP-9810 / MP-9830
- The relationship between the shape of the detection gear and the waveform of the output signal is
- What should be noted when installing multiple MP-9810/MP-9830 devices? (Additional question) I installed four MP-9810/MP-9830 devices on one gear. The material of the fixing jig is SUS400 series. The outer two devices operate even with a gap of 1 mm or more from the gear, but the inner two do not operate with a gap of 1 mm; they only operate with a gap of 0.8 mm. Why is that?
- Can MP-981/9820 be replaced with MP-9810/9830? What are the differences from MP-981/9820?