Real-time Sound and Vibration Analysis System DS-3000 series (Discontinued product)
FAQ
- Unit calibration in the absence of an acoustic calibration device for MI series measurement microphones.
- I want to determine mechanical impedance using an impulse hammer (force sensor) and an accelerometer.
- When launching the DS-3000 series software, an error message appears stating "Please update the firmware of the DS hardware. Cannot connect to the hardware."
- What is the frequency range of the overall value of bundled octaves according to FFT analysis?
- Please tell me about the differences between DS-0321 and DS-0321A.
- Please tell me about the necessary equipment and precautions for FRAME LINK2 (connection of four units).
- How to check if FRAME LINK2 (4 unit connection) cannot be connected.
- What is the difference between the FRAME LINK and FRAME LINK2 functions?
- How to bulk load information from multiple TEDS-compatible sensors?
- How can I change the output voltage of the time record signal output (DS-0321)?
- What is the recording time for one file of recording function software (4 GB)?
- The DS-3000 series installed on a Windows 10 PC cannot connect to the DS-3200 hardware. What should I do?
- I would like a sample file for the user-defined filter in the real-time octave analysis function.
- How to apply the frequency correction specified in ISO 5349-1 (Measurement standard for hand-arm vibration) using the DS-0323 real-time octave software?
- I want to convert the 'velocity' measured by the Laser Doppler Vibrometer into 'gravitational acceleration'.
- What is the sampling frequency of record files that can be analyzed offline with the DS-0323 real-time octave analysis function?
- Please explain the meaning and relationship of the trace line settings in the tracking analysis function.
- How can I simultaneously view the tracking diagram and either the power spectrum or the time waveform during tracking measurement?
- What is the number of channels that can be used with the servo analysis function and the frequency range that can be analyzed?
-
Does not recognize Protect Key, DS-0299 ONO-LINK2 (USB), DS-0399 ONO-LINK3 (USB) on Windows 10.
