CF-5200 sound level meter and octave analysis (discontinued product)
FAQ
- After setting the sound level meter to CAL and performing the calibration of CF, changing the range of the sound level meter will change the Y value of CF.
- The overall values from October 1/3 and the overall values from frequency analysis are different.
- What is the difference between 1/1 and 1/3 OCT analysis?
- The cutoff frequencies for 1/1OCT and 1/3OCT (bandwidth)
- Is it possible to display bands below 63Hz in the 1/3 octave analysis?
- I want to measure down to a 25Hz band in the 20kHz range using 1/3 octave analysis, but it only displays up to a 160Hz band. The CF350 was able to do it.
- Changing the voltage range and frequency range decreases the overall value.
- Can the ALL BAND DISPLAY key display analysis for all bands up to 100 kHz?
- To analyze sound.
- To calibration CF so that it becomes a dB value of sound level meter,
- I want to see frequency analysis and sound pressure levels with the sound level meter signal.