Accelerometer Frequently Asked Questions
Question number FAQ-1382
To convert the voltage signal from Accelerometer into velocity and displacement:
I want to determine velocity and displacement from acceleration data obtained through frequency analysis. Could you please tell me if there's an easy way to do this? |
If the frequency f and its acceleration amplitude A are known, the velocity amplitude V and displacement amplitude X can be calculated using the following formulas.
A （m/s2）
V = A ÷（2πf） （m/s）X = V ÷（2πf） （m）
Since the voltage waveform of acceleration does not contain the value of f, conversion is not possible.
Is there a way to observe acceleration waveforms recorded by a data recorder or similar device as velocity and displacement waveforms? |
One method involves using an analog integrator to obtain velocity V and displacement X.
The NP-2000 series of charge-type Accelerometer uses the CH-1200 type charge amplifier.
The NP-3000 series of amplifier-integrated Accelerometer uses the PS-1300 type amplifier.
It is available for use.
Last updated: 2002-08-19