Torque Meter TS-2700 Frequently Asked Questions
Question number FAQ-1324
The zero point is off.
| cause | Confirmation items | Processing method |
|---|---|---|
| The torque zero correction value is not set. | Setting the zero correction value for torque | Set the torque zero correction value. |
| We performed a measurement under overload conditions. | Torque zero correction value setting / Torque of the object being measured / Presence or absence of sudden start / Sudden stop | Contact your dealer or our sales office. |
| A shaft torque was applied while the object was stationary. | Disconnect the shaft connection and check the zero point. | If the zero point is not shifted, there is no need to change the zero point. |
Last updated: 2026-07-15