Torque Meter Frequently Asked Questions
Question number FAQ-1277
Changes to the model name and appearance of the MD series torque detector.
The MD series of torque detectors for small capacitances has undergone a design change to enhance signal output. As a result, the appearance has changed, and the model number has changed from MD-***R to MD-***B.
■ Model name change
| Old model name | New model name |
|---|---|
| MD-201R | MD-201B |
| MD-501R | MD-501B |
| MD-102R | MD-102B |
| MD-202R | MD-202B |
| MD-502R | MD-502B |
| MD-103R | MD-103B |
| MD-203R | MD-203B |
| MD-503R | MD-503B |
| MD-104R | MD-104B |
| MD-204R | MD-204B |
■ Exterior changes
(New) MD-***B
<Please refer to this outline drawing for the exact dimensions of the new model.>
For the MD-201B, 501B, 102B, 202B, 502B, 103B, and 203B models only, the connector box position has been raised by 5 mm. Note that the shaft height remains unchanged.
(old) MD-***R
Last updated: 2002-06-17