Torque Meter Frequently Asked Questions

Question number FAQ-1258

Differences in settings between the SS series electromagnetic gear phase difference method and the TH series electromagnetic induction phase difference method.

Electromagnetic Gear Phase Difference Method

Electromagnetic Induction Phase Difference Method

Target model

SS / MD / DD / EZ / DSTP series

TH series

setting

Input the characteristic data such as factors and ranges of the detector into the display, and obtain and set the zero value after input.
(Characteristic data is listed on the model nameplate)

Characteristics data of the model nameplate FACTOR during in-house testing, RANGE (or CAPACITY) TEMP (temperature of the torsion bar)

Characteristic data such as the detector factor and zero are set automatically on the display when the power is turned on
(when a TH Series detector is connected to a TS-2800 (TH-5100) using a dedicated
cable), they are automatically set on the display.

It can
prevent data re-entry due to input errors.

The mounting hole dimensions, center height, and shaft dimensions are the same for both the SS series and the TH series.

Last updated on: 2013-04-15