Sound level meter - Frequently Asked Questions
Question number FAQ-1230
I can't record sound. What are the settings? I can't set Memory Mode to Record. I have set Memory Mode to Record, but I can't record.
① Different Operate Mode
- Please note that you cannot switch the Memory Mode setting if Operate Mode is set to [Quad]/[RTA1/1]/[RTA1/3]/[FFT]/[Londness].
- After switching the Operate Mode to one of the following: [Single]/[Dual]/[Filter1/1]/[Filter1/3],
Please switch the Memory Mode setting again.
② Number of bits to store and level range
- If the sound recording bit depth is set to 16-bit, store standby is not possible in wide range mode. Please switch the level range to normal range.
- To save in wide-range format, switch the sound recording bit depth to 24-bit. In this case, "REC24" will be displayed in the Record indicator.
③ Time setting
- If you set Meas Time to 0 seconds, recording will not be possible.
- When Memory Mode is switched to AT/REC, recording is only possible if the Meas Time setting is set to 10 seconds or longer.
- If you set an Interval Time, please set the Meas Time to be at least 30 seconds longer than the Interval Time. Recording will not be possible if it is less than 30 seconds.
Last updated: 2017-06-09