sound level meter Frequently Asked Questions

If the measurement start mode is set to MANUAL (at the point when the 'START' button is clicked) instead of TIMER, the following operations should be performed to interrupt the measurement after clicking the 'START' button to begin the calculation measurement.

■ Use operation switch

■ Operating Procedures

• Click the 'PAUSE' button to display the 'pause mark'.
  
• Click the 'MENU' button to open the menu screen.
  


• Click the 'MENU' button again to return to the measurement screen. The 'pause mark' and 'STB mark' will turn off.
  

Additionally, it is also possible to use the 'CAL' button instead of the 'MENU' button.