Skip to main content

Select your region & language

Global

Region

Frequently Asked Questions about FV Converters

Question number FAQ-0840

What is the method for setting the input conditions for the pulse signal (negative voltage) input to the FV-1500 centered around 0 V?

For pulse signals centered around 0 V (negative voltage), it is recommended to set the input signal format to AC.

  • SIGNAL: Input Signal Format

  • Pressing the [MENU] key activates the setup mode, where expanding [0:INPUT] > [INPUT-SIGNAL] will display the
    settings for input signal conditions.

Last updated: 2024-05-22