DS-3000 Frequently Asked Questions

Select 'full scale of A/D data' in the amplitude mode of the time record signal output and set the amplitude value.

- Amplitude during recording: The output will reflect the voltage magnitude of the recorded signal as it is.

- A/D data full scale: The voltage range value at the time of recording (full scale of A/D) can be output at an arbitrary voltage. The configurable voltage is up to 10 V.

For example, when the recording range was 0.1 Vrms (0.141 V), if the amplitude [V] is set to 5,
it will output at 5 ÷ 0.141 = 35.5 times the voltage.