CF-5200 Frequently Asked Questions

Question number FAQ-0591

During the hammering test, a double hammering alarm appeared in the acceleration waveform.

To use the double hammer cancellation function, turn on the hammer waveform channel, not the acceleration waveform channel.

Please use the trigger function with the auto-ranging function turned off (fixed range) for the voltage range.

By using the AD over-cancellation function in conjunction with this feature, you can avoid using data that has been over-engineered.

Related instruction manual chapters

3.1 Auto-Range Function
3.2 AD Over-Cancellation Function
3.7 Trigger Function
3.8 Double Hammer Cancel Function

Last updated: 2006-01-16