CF-5200 Frequently Asked Questions

Question number FAQ-0479

I want to control the actuator in the servo analysis sine sweep. (1) Is it possible to set the amplitude to a 1mV step? (2) What does the amplifier control function mean?

(1) Not possible. It will be set to a 10mV step.

(2) This is a function that maintains the vibration acceleration of the vibration machine at a constant level (feedback control). It is only available when using a sine sweep signal.

Chapter of the relevant instruction manual

Analysis of the 4.5 amp control function

Last updated date: 2006-01-16