CF-5200 Frequently Asked Questions
Question number FAQ-0385
The acceleration signal is integrated once to display velocity, but the data increases significantly at low frequencies. Since we are evaluating it overall, I would like to cut that part out.
As methods
(1) Use the DC cancellation feature.
(2) Use a high-pass filter.
(3) Specify the calculation range of the overall using the partial overall feature.
(4) Change the display range using the X-axis scale feature.
can be considered.
(1) Use the DC cancellation feature.
(2) Use a high-pass filter.
(3) Specify the calculation range of the overall using the partial overall feature.
(4) Change the display range using the X-axis scale feature.
can be considered.
Last updated date: 2026-07-15