CF-5200 Frequently Asked Questions

Question number FAQ-0377

To double integrate the time waveform of acceleration G and calibration to displacement (μm):

(1) In the EU calibration function sensitivity settings, set the voltage per 1m/s² and set the unit to "m".

(2) Display the displacement using the time-axis integration function.

(3) In the old version, you can use the speed/displacement direct reading function "G→mm".
This feature has been removed in the new version to comply with the revised Measurement Law.

Related instruction manual chapters

5.3.11V is set to any EU.
5.5.3 Speed/Displacement Direct Reading Function
5.5.2. (2) Frequency axis integral

Last updated: 2006-01-16