CF-5200 Frequently Asked Questions

Question number FAQ-0372

To restore to the factory settings

This operation resets the settings to their factory defaults and also serves as a self-check, so your current settings may be erased. Please be careful to save your settings to the panel condition or floppy disk beforehand. You can also check the installed options using the option list displayed on the screen.

<Operation>

① While simultaneously pressing the SEARCH button and the RECALL button, press the RESET button once.

② Once all the buttons' LEDs light up, release the SEARCH button and the RECALL button.

③ After a few tens of seconds (self-check), the OPTION list will be displayed on the screen.

The light will blink at this time, but this is not a malfunction.

④ To resume, press the RESET button.

(Note) When step ③ is performed, an options list will be displayed on the screen. Options with the model number (0550, 0551, 0552, TRACK, SIGOUT, etc.) listed as "OK" are included. Options listed as "OPTION" are not included.

Last updated: 2000-04-10