CF-5200 Frequently Asked Questions
Question number FAQ-0364
When the data stored in block memory was automatically transferred to the floppy disk, it displayed "The floppy is full, please change it" and required 5 disks. Why?
When installing the optional CMOS memory, the block data can be expanded to 600.
One FD can store about 200 blocks.
Block memory No. 1 does not change to the next number (it remains No. 1).
Before saving to the second FD, please change the block number to the desired number to start the memory.
For example, please change it to N0.200, which may overlap with the first one.
The change of the block number is made using the ADDRESS switch in the MEMORY section.
Chapter of the relevant instruction manual
2.8.1 Screen Memory Using Block Memory
Last updated date: 2006-01-16