CF-5200 Frequently Asked Questions

The checklist items are

1. Check if the exponent of the SENSITIVITY (V/EU) setting in the vibration analysis mode is correct.
2. Adjust the voltage range optimally.
   Set it to the voltage range just before the input OVER lamp lights up.
3. If connecting directly from the sensor, set the connector selection to SENSOR.
4. When the Y LOG/LIN button is set to LIN, the display becomes smaller.
   Press the Y scale △▽ to enlarge the display
   or set it to auto-scale mode.

Chapter of the relevant instruction manual

22Easy Operation
6.1.1Switching between Y-axis log and linear
6.1.1(1)Changing the scale of the Y-axis
6.1.1.(3)Method using auto-scale