CF-5200 Frequently Asked Questions
Question number FAQ-0331
(1) In the impact testing mode, a message appears saying "Lower the sensitivity of CHA," but what should be done? (2) Which type of hammer tip is the best?
Please set the voltage range to a larger range, such as 1 to 10V.
(2) If the head of the impulse hammer is made of rubber, the impact waveform becomes round and the excitation frequency will be in a lower frequency range.
Please select a head (tip) that can excite up to the frequency range you wish to measure.
Chapter of the relevant instruction manual
22Easy Operation
Last updated date: 2006-01-16