CF-4500 Frequently Asked Questions
Question number FAQ-0291
Regarding the output of the judgment results, I have turned START CLEAR ON to clear the judgment results displayed on the screen each time I start the command. The CF-4500 unit screen shows --, but the digital I/O judgment output is constantly being output. Is there any way to make the output synchronize with the judgment display on the screen?
Even if the CF-4500's judgment screen shows "--", the terminal's judgment output is retained until the next judgment result. To clear the output, you need to turn the COMPARE key OFF and then ON. When performing average start → judgment → average start (clearing the judgment result at this time) consecutively, assign commands equivalent to average start and judgment OFF/ON (ASTCMSCMT for RS-232C) to any terminal of the Input relay using digital I/O. When this terminal is turned ON, averaging starts and COMPARE is turned OFF/ON at the same time, the unit's display shows "--", and the judgment result output is turned OFF.
Last updated: 2012-06-12