CF-3000 Frequently Asked Questions

Question number FAQ-0256

The method of three-dimensional representation of BLOCK MEMORY.

The procedure for operation is

<Example> If the stored block memory is from No.7 to No.27

(1) Display the list of block memories and position the cursor on the data of No.7. (Specify the smallest number of the block No. you want to display.)

Check RECALL and click OK.

Data for No. 7 will be displayed in playback.

Turn on the ARRAY button on the panel surface.

Data from No.7 will be displayed in three dimensions.

To deactivate the three-dimensional display, press the SINGLE button on the panel surface.

(5) Note
There is no data available from No.7 to No.27.
It is necessary that the measurement conditions such as frequency range and voltage range are the same.

Last updated: 2001-03-01