CF-3000 Frequently Asked Questions

(1) Install the printer driver.
Please prepare and install the printer driver for the FD.
The CF-3000 series operates on Win95, so perform the same operation as the built-in Win95 on your computer, "Start → Settings → Printers".

(2) If the CF-3000 is the English version,
the printer driver for Japanese will cause garbled text during installation, but please continue as is.

(3) After installation, start the CF-3000 and perform the operation to change the font size. This operation will recognize the driver and enable printing.

(4) If the printer driver is supplied via CD, please request a manufacturer exchange for the floppy disk (FD) version or download the FD version from the printer manufacturer's homepage.

(5) Note
If the text does not print immediately after installation,
please change the display font of the CF-3000 series once and then try printing again.
The operation is in the function key menu "M6→Change Font".
In fact, any item in this menu will work, but changing the font size is simple.
Please be careful that the free space on the C drive does not fall below 10MB due to the driver installation.