Wire Encoder Frequently Asked Questions
Question number FAQ-0161
To extend the signal code.
A cable of approximately 2 meters is drawn directly from the detector body of the WE-1011 and WE-5011 wire encoders, and the following connector is attached to the cable terminal. The colors of the wires and the pin contents are shown in the table below.
- Connector Type: R03−PB−6M (manufactured by Tajimi Radio Co.)
- Suitable connector as above: R03−JB−6F type (manufactured by Tajimi Radio Co.)
| PIN number | A | B | C | D | E | F |
|---|---|---|---|---|---|---|
| cable color | blue | white | red | shield | black | − |
| signal | SIG 1 | SIG 2 | +Vcc | CASE | 0V（COM） | empty |
Please use the connector: R03-JB-6F type (manufactured by Tajimi Wireless Electric Co.) for the extension cord.
Last updated: April 12, 2002