Frequently Asked Questions about Roller Encoders
Question number FAQ-0132
Signal cable for RP-700 series roller encoders, connector type (target models {discontinued}: RP-721, RP-732, RP-704ZA, RP-7112)
The signal cables for roller encoders such as RP-721, RP-732, and RP-704ZA have connectors on the cable side sold separately. The respective model numbers are shown in the table below.
| 適応ローラ エンコーダ |
ケーブル名称 | 信号ケーブル 型名 |
ケーブル側 コネクター型名 |
suitable indicator |
|---|---|---|---|---|
| RP-721 RP-732 |
R66 core twisted pair cable |
RP-004 5m (discontinued and displayed) |
RM12BPE-5S (Manufactured by Hirose Electric) |
TM-3100 シリーズ |
 |
||||
| R6 6-core twisted pair cable |
RP-006 5m (discontinued) ↓ RP-0182 5m (successor) |
RM12BPE-5S (Manufactured by Hirose Electric) |
RV-3150 | |
 |
||||
| RP-704ZA | R6 6-core twisted pair cable |
3T5-3T5-D 5m | dual end crimp terminal | RV-3150 |
| (Note) This is processed with R6 cable and crimped terminals at the ends. | ||||
| RP-7112 | R6 6-core twisted pair cable |
SNW-R60P (discontinued) | SNW2010-PCF | RV-3150 |
- The R6, RM12BPE-5S (made by Hirose Electric Company) is available at our company.
- If you need more than 5 meters, we will provide a quote by specifying the length.
- For details on wiring, please refer to the simple operation manual for each roller encoder.
Last updated date: 2002-02-15