Digital Gauges: Frequently Asked Questions

GS-7710/GS-7210L (Standard Stem Type)

• Please use our gauge stand or indicator bush AA-2500 (optional) to hold the stem in place. (Tightening the stem directly with screws may cause malfunction.)
• The recommended tightening torque for an M6 screw is 0.5 N·m or less.
• Please ensure that the spindle operates smoothly after it has been fixed in place.
• Ensure the slotted position of the indicator bush is perpendicular to the screw.

GS-7710N / GS-7210LN (Nut Stem Type)

• The mountable board thickness is 9.8 mm to 12.4 mm.
• The recommended tightening torque for the nut is 0.8 N·m or less.
• After fixing it in place, please ensure that the spindle operates smoothly.