Digital Gauges: Frequently Asked Questions

The DG-0010 converts the output signal from the linear gauge sensor from a voltage signal to an open collector output.
The DG-0020 is an output conversion box that converts voltage signals into line driver outputs.

In the case of DG-0010
If the input signal is high level, the open collector output section will be in the off state, and if the input signal is low level, the open collector output section will be in the on state.
The unit's signal indicator lights up when the input signal SIG1 is at a high level.

In the case of DG-0020
The output signal changes at the same timing as the input signal's high and low levels.
The unit's signal indicator lights up when the input signal SIG1 is at a high level.