Digital Gauges: Frequently Asked Questions
Question number FAQ-0089
List of specifications, accessories, and options for DG-825, DG-925, DG-525, and DG-525H.
The specifications, accessories, and options are shown in the table below.
(1) Specifications, accessories
| Specifications/Model | DG-825 | DG-925 | DG-525H (The DG-525 is no longer available.) |
|---|---|---|---|
| Measurement range | 25 mm | ||
| Resolution | 10 μm | 1 μm | 0.5 μm |
| Indication accuracy (At 20℃) | 5 μm | 3 μm | 1 μm（DG525H） 1.5 μm（DG525） |
| Maximum response speed | 1 m/s | 500 mm/s | 300 mm/s |
| Measuring power | 1.47 N (150 g or less) | ||
| Display section | 4-digit LCD display (With ± polarity) | 5-digit LCD display (With ± polarity) | 6-digit LCD display (With ± polarity) |
| Data output | Serial BCD | ||
| Power supply | AC adapter PB-701 or TA2096 （AC100V±10％ 50～60HZ） Alternatively, it can be used continuously for approximately 8 hours after charging the rechargeable battery for 16 hours. | ||
| Operating temperature range | +5 ℃～+40 ℃ | ||
| Storage temperature range | -10 ℃～+55 ℃ | ||
| Weight | 約180 g | ||
| Accessories | Finger Lift (AA-969) AC adapter (TA2096) | ||
(2) Options
| Options/Models | DG-825 | DG-925 | DG-525H (The DG-525 is no longer available.) |
|---|---|---|---|
| Dustproof rubber | AA-843 | ||
| back cover without earrings | AA-968 | ||
| Lift lever | AA-971 | ||
| Release Lifter | AA-972 Use in combination with release AA-813 or AA-816. | ||
| Measurement tip | Various preparations | ||
| Extension spindle | AA-844 (for 30mm) AA-845 (for 50mm) | − | |
| Dustproof rubber, Same type eyelet adapter | AA-843 When using with non-standard probes, the AA-829 probe adapter is required. | − | |
| Gauge stand | ST-022/044B/005 ST-011 (discontinued) However, ST-044B requires stand bush AA-891. | ST-022/044B However, ST-044B requires stand bush AA-892. | |
| Digital printer | RQ-2110 | ||
Last updated: 2002-03-15