Digital Gauge Frequently Asked Questions
Question number FAQ-0052
I want to input the hold command directly from the switch without going through the device network, but...
It is equipped with input terminals. From this terminal block, four types of signals can be input.
- Peak Hold ON Input
- Hold Input
- Reset Input
- Comparator ON Input
recommended interface
Peak hold ON input, hold input, reset input, comparator ON input
| open circuit voltage | 5.25 V or below |
|---|---|
| short-circuit current | below 1 mA |
| connection resistance | below 100 ohms |
Last updated date: 2026-07-15