Digital Gauge Frequently Asked Questions

Setting values and measurement values of DG-4160

• Reading of measurement values (IN)
  • Normal: Value after the calculation of Offset and Factor
  • maximum value when peak hold function is ON
  • Min: Minimum value when peak hold function is ON.
  • Range: Maximum value - minimum value when the peak hold function is ON.
• Hold and reset of measurement values (OUT)
• Execution and stopping of peak hold (OUT)
• Execution and stop (OUT) of the comparator.
• Setting of judgment values (Upper, Lower) (OUT) and reading of set values (IN)
• Loading of judgment results (IN)
• Setting of sensor resolution (OUT) and reading of set values (IN)
• Setting of Direction (OUT) and Reading of Setting Values (IN)
• Selection of measurement data item values to display (Normal, Max, Min, Range) (OUT)
• Reading error output signal (IN)

(Note) OUT and IN are the terms as seen from the PLC side (sequencer).