Vehicle Speedometer Frequently Asked Questions

The appearance and mounting method of the clamp lever commonly used in spatial filter type speed detectors such as "LC1100/2100/3110/3210", "SF660B/760B", and "DL2100/2200" are as follows.

Please be sure to install the right-side crank lever ("S-type") first. After loosely fastening the screw, you can freely move the lever position to any angle by pulling the lever upwards and rotating it.

Pull out the lever and rotate it, first adjusting it so that the S-shaped clamp lever faces the opposite direction from the L-shaped clamp lever. This will help avoid mechanical interference between the levers.