CF-5200 Other Questions (Discontinued Products)
FAQ
- How many data can be stored when expanding CMOS memory?
- I want books and materials about impulse hammer measurement.
- Is it possible to key in the unit of acceleration (m/s²)?
- The function of auto-recall is
- I want to measure how high the rotation of the inverter motor can go in RPM when voltage is applied for just one second, but since no method is provided, I am measuring the basic cycle of the vibration sensor and observing the steady rotation.
- Can the sequence of waiting for a trigger, acquiring data, storing it in memory, and waiting for a trigger be repeated?
- How to not record search point marks in data?
- How to check the contents of the condition memory.
- What does the text 're -ha' at the bottom of the screen mean?
- The software has an option for Japanese display integrated, but the initial screen appears in English letters.
- I want to use an interval timer for repeated measurements.
- Is there a good method to measure the variation in the period of a frequency of 1Hz over 100 pulses?
- The specifications of RGB OUT are
- I selected +/- for polarity selection with an external trigger, but only + is being activated. I have set the hysteresis to 10%.
- I want to measure the vibrations, runout, and noise of a rotating body (spindle). What kind of equipment configuration should I prepare?
- (1) What are the differences between the CF5220SV and the specification without 'SV'? (2) I want to display the transfer function in Nyquist format for CF5220, but it is not mentioned in the catalog. Is it not possible unless it is the SV version?
- What is the difference between AC and DC coupling?
- The 2Hz vibration component varies in amplitude from 1 to 5. I want to measure the states of amplitude 1 and amplitude 5 in a distinguishable manner.
- What is the difference between FFT and a spectrum analyzer?
- (1) Is it possible to input control contacts from external sources? (2) Can a compare function be added?
- What are the differences in specifications between CF5210 and CF360ZA?
- Is the optional keyboard the same as the one for the computer?
- I calculated the damping ratio using an exponential window and curve fitting, but has the window correction been applied?
- I want to inspect it, but what is the accuracy like?
- What is a conversion adapter as described in the catalog?
- What should I choose for a color video printer?
- The difference from CF350 is
- Is there software equivalent to WS5130?
- I want to analyze the jitter meter (rotation, frequency variation).
- (1) The reference for dB is (2) the reference value of sound pressure.
- The selection of data recorders for measuring and analyzing the transmission of structural materials.
- Can we generate force and acceleration data at specific frequency bands during impact testing?
- I want to obtain the frequency response function from the sound of the source and the sound at the measurement point, and then predict the sound at the measurement point when the sound of the source is changed, including phase information (the source is an FFT signal output plus a speaker).
- Is there a measurement cart?
- What are the differences in specifications between the CF5200 and DS series, and what are the advantages of the DS series?
- I want to input the digital signal after A/D conversion into the CF for frequency analysis.
- The method of cutting low-frequency components and analyzing them.