CF-4500 General-Purpose (Discontinued Product)
FAQ
- How long does it take to load the panel conditions?
- Is there a status that indicates the loading of panel conditions has been completed?
- How long does it take from performing the measurement (average processing) to the output of the judgment result?
- Depending on the inspection target, the judgment block is different, but can we switch only the blocks used for judgment without changing the panel condition?
- I want to make a hard copy of the CF-4500 screen.
- Are there any recommended USB memory sticks?
- What types of communication commands can be registered for input contacts?
- If multiple judgment blocks are set, can AND and OR be configured for each individual block?
- Regarding the output of judgment results, I have set START CLEAR to ON, and I clear the displayed judgment results every time I start a command. The screen of the CF-4500 shows --, but the digital I/O judgment output remains constant. Is it possible to synchronize the output with the judgment display on the screen?
- If the CF-0458 is equipped with a power backup function, is it okay to turn off the main power immediately after the CF-4500 starts?
- The Input relay set in the main body is cleared when it reads the panel condition. Is it not possible to store the settings of the Input relay in the panel condition memory?
- When the CF-4500 unit is powered on, the WAVE MODE is OFF. Is it not possible to turn the WAVE MODE ON at startup?
- Is it possible to manage multiple CF-4500 devices from a single PC using the external control function via LAN connection?
- What is the timing and duration of the output from the 'PANEL COND READ' of the OUTPUT RELAY?