Skip to content

Select your region & language

Global

Region

Three-dimensional optical unit
LV-3800

The LV-3800 three-dimensional optical unit is Laser Doppler Vibrometer system that detects vibrations occurring in three axes non-contact. It can simultaneously detect vibrations in the XYZ axes of microstructures, small masses, and ultrasonically driven objects that are difficult to detect with contact methods. It is smaller than conventional devices and makes laser beam alignment easier.

Features

  •  3-axis non-contact vibration detection is possible from 0.3 Hz to 100 kHz *1.​ 

  •  With the LV-0181's built-in positioning camera *2 attached, you can view images of the detected area on your PC. 

  •  It is possible to detect minute objects with a laser spot diameter of approximately 30 µm. 

  •  You can freely rearrange the configuration of 1 axis (out-of-plane), 2 axes (+in-plane), and 3 axes (3 axes). 

  •  The head unit allows for laser irradiation positioning in the upper and left/right directions, and is also capable of inverted detection. 

  •  Laser Doppler Vibrometer are compatible: LV-1800, LV-1710 *3 / LV-1720 *3 / LV-1720A *3.​ 

*1 Please contact us for analysis at 100 kHz or higher.
*2 Option
*3 Discontinued products

Case Studies

  •  Measurement of VCM (Voice Coil Motor) behavior 

  •  Measurement of the shear behavior of piezoelectric elements 

  •  Measurement of ultrasonic tool behavior 

  •  Non-contact 3D detection of mechanical and general structures 

System Configurations

System Configurations

レーザードップラー振動計 LV-1800×3

Specification

Compatible Laser Doppler Vibrometer
LV-1800, LV-1710 * /LV-1720 * /LV-1720A *
*Discontinued products
Detection optics
detector mount
M22 x 0.5, Length 4 mm
Measurement distance
165 mm
Target observation device
Target observation device
LV-0181 Built-in camera for positioning
Focusing unit
method
Manual coarse and fine adjustment
Up and down stroke
30 mm
Coarse stroke
36 mm/rotation
Fine adjustment stroke
0.2 mm/rotation
Overhang amount
100 mm
Fall prevention
Equipped with a fall prevention ring.
base
material
Aluminum (with magnetized steel plate attached)
size
310 mm x 300 mm
Fixed
0° (vertical) / 90° / 180° / 270°
Radiation safety standards for laser products
Laser safety class
Class 3R
three-dimensional optical system
Angle
17°
Adjusting the clamping angle
±1°
Adjusting the clamping angle
±1°
Scalability
Two-axis, two-dimensional capability
Laser focus
The procedure was performed using laser Doppler sensors mounted on each axis.
Usage environment
Usage environment
Complies with the corresponding detector.
Weight
15.5 kg (excluding attached sensors)
Inquire about this product

最終更新日:2022/02/01