Skip to main content

Select your region & language

Global

Region

Outline Drawings

* outline drawing To download data, login and new member registration are required.

Please be sure to read before downloading outline drawing

  • outline drawing Login IDs for downloading and downloading manuals have been integrated. (You can now log in and download using either of your registered IDs.)

  • Clicking the file name for the first time will display the login/registration screen. (Right-clicking with the mouse is not supported.)

  • After entering your email address and clicking the "New Registration" button, please register as a user according to the instructions provided. Your login ID will then be sent to your registered email address.

  • Free email addresses and mobile email addresses cannot be used.

  • Once you register, you won't need to register again next time. After registering, you can download and save the drawing files you want by left-clicking them with your mouse.

  • If you select "Text Document" as the file type, it may not be saved with the correct extension, and you may not be able to open it with CAD software.

  • Depending on the CAD software you are using, some text may be garbled. Please check and correct the information in the catalog or PDF.

  • The DWG files are created in accordance with the AutoCAD 2007 format, but please note that they may not open depending on your CAD environment.
    *If you need to convert the version of your DWG file, please refer to DWG TrueView (AutoDesk).​
    *We have discontinued providing new files in DXF format. Thank you for your understanding.

  • Even if the model code is different, the exterior dimensions may be the same; in such cases, outline drawing is listed together.

  • There are cases where outline drawing have added options. For example, the SS-type torque detector is a outline drawing equipped with the MP-981 rotary detector. There are no default options, so please download and modify them.

  • For dimensions without specified tolerances, we apply tolerances based on our company's regulations as described below.

Nominal size (L: mm) Dimensional tolerance (mm)
30以下 ± 1.0
Over 30 and under 120 ± 1.5
Over 120 and under 315 ± 2.0
Over 315 and under 500 ± 3.0
Over 500 and under 1000 ± 5.0
Over 1000 ± (5.0 + L × 0.2 %)

Precautions for use

Even if you have been notified in advance that damages may arise from the use of or inability to use the services of this site, and that such damages may occur or that there may be claims for compensation from third parties, our company assumes no responsibility whatsoever. The copyright of outline drawing belongs to Ono Sokki Corporation. Publishing or providing it to third parties without permission is prohibited. Please be aware.