As a successor to the conventional PC-based FFT analyzer DS-3100, we have developed the DS-3200, which comes standard with a USB 3.0 interface.
An FFT analyzer is a system used to analyze vibrations and noise emitted by various products and equipment, and it is required to be able to record and analyze data within a limited time on-site. This requires reliability in saving measured data from the FFT analyzer to a PC without any data loss, and the ability to perform measurements efficiently on-site.
Furthermore, with the increasing prevalence of PCs equipped with high-speed USB 3.0 interfaces, there is a growing demand for FFT analyzers compatible with USB 3.0 interfaces, and the DS-3200 is a product designed to meet that need.
High communication speed
In recording mode, you can record 16 channels in the 40 kHz range and 32 channels in the 20 kHz range. (Note: The actual number of channels that can be recorded depends on the recording conditions and environment.)
| <Reference value> | |
| Number of channels that can be recorded (Recording mode) |
20ch |
| Recording conditions | Frequency range: 40 kHz, 24-bit data, includes rotation information. |
| PC used | FUJITSU LIFEBOOK A573/G ・CPU: Intel® Core™ i5-3340M (2.7 GHz) • Memory: 4GB ・OS: Windows® 7 Professional (32bit) |
Improved versatility
The FFT analyzer can now be connected to a PC using a commercially available USB cable, improving versatility. It supports both USB 3.0 and USB 2.0 (Note: USB 2.0 has a lower communication speed than USB 3.0).
It now supports the latest PCs, including ultrabooks.
Inter-chassis connection with the previous model (DS-3100) is possible.
The DS-3200 can be connected not only to other DS-3200 units, but also to the existing DS-3100 unit via chassis-to-chassis connection. By connecting the DS-3200 and DS-3100 chassis-to-chassis, the DS-3100 can be controlled via the USB interface.
Upgrades from the previous model (DS-3100) are possible.
We can take your existing DS-3100 unit and modify it by replacing the main unit.
