Repolyzer XN-8000 series (discontinued product)
FAQ
- What is the frequency range of the ORF file created when saving record data?
- To save graph data to a text file:
- I want to time-record only one channel and create an ORF file.
- When I copied the graph from the [Measurement Paper] to the [Report Paper], the [Report Paper] changed back to the [Measurement Paper], and when I started the measurement, the data was updated. How can I save the graph data I want to keep?
- How to measure the peak hold of a power spectrum
- How to change the orientation of the measuring paper from portrait to landscape
- How to measure the power spectrum when the overall power is at its maximum (MAX OA function)
- Can I launch the project by double-clicking it?
- What is multi-frequency range?
- In both the XN-0821 and DS-0221 software, what is the order of differential and integral operations when the value is 1/H?
- Even though I specify the frequency response function in the graph display data settings, the data is not displayed.
- Is it possible to calculate the frequency response function of multiple master signals (reference signals), such as Ch1 and Ch2, and Ch3 and Ch4, in a single measurement?
- What is the maximum time waveform that can be recorded on the XN-8100?
- Why do the power spectral averaging results differ between offline and online analyses?
- Sometimes, the mouse suddenly stops working while I'm using it. What should I do?
- I want to display the octave data list from 20Hz to 20kHz.
- The active graph in the displayed data is always shown in red. Is there a way to keep it in its original color?
- If I accidentally close a report paper using the "x" button on the window, can I recover the data?
- Offline analysis and averaging: "When averaging (power spectrum averaging) is performed using offline analysis, the amplitude of the data doesn't change that much, but it starts small and gradually increases."
- When I displayed six order lines and one overall line on a single tracking diagram (X-axis: r/min, Y-axis: power) and exported it as a text file, two files were created. Why?
- calibration method that combines Accelerometer and a vibration level meter to display the vibration level in dB units.
- Explanation of calibration items
- I want to find the envelope of the vibration waveform and display its frequency analysis (power spectrum).
- calibration method for a sound calibration meter using an acoustic calibrator
- The "External Amplifier" setting appears in both the "calibration" dialog and the "Channel: Signal Input" dialog. What is the relationship between them?
- How to save only the data (export)
- How to read saved files (import)
- When calibration using a reference signal and selecting voltage input, Accelerometer, or vibration meter as the sensor type, it's not possible to set calibration value in dB. What's a good way to do this?
- How can I move the search cursors on both screens simultaneously when displaying the same function on two screens?
- How to display the harmonic list
- What is multi-app?
- I connected the LA series sound level meter and selected the model in calibration dialog. What level range (dB) should I use for measurement with the sound level meter?