Charge converter

CH-6130/CH-6140

The CH-6130/CH-6140 charge converter is a simple charge amplifier for converting electric charge signals into voltage signals.

While charge output type Accelerometer typically require a separate charge amplifier, this charge converter allows for direct connection to the BNC input terminal of an FFT analyzer or similar device.
Furthermore, it neatly organizes the often complicated wiring around signals and power supplies.

Inquiry

Small, lightweight, and simple charge amplifier
It can be directly connected to the sensor input BNC connector of constant current drive (CCLD) compatible equipment such as FFT analyzers.
Two models are available: the CH-6130 with a conversion coefficient of 1 mV/pC and the high-sensitivity CH-6140 with a conversion coefficient of 10 mV/pC. The choice depends on the sensor sensitivity of the input Accelerometer.

Model name	CH-6130	CH-6140
gain	1.0 mV/pC ^*1	10 mV/pC ^*1
Frequency range	2 Hz to 45 kHz (±3 dB), 5 Hz to 15 kHz (±0.5 dB) ^*2
Output voltage	10 Vp-p or more
Output bias	10 Vdc ± 2 Vdc
Input-calculated noise	0.05 pC (rms) or less
Power supply	Voltage: 18 V to 36 V, Constant Current: 2.0 mA to 20 mA
Connector shape	Input section: Miniature connector, screw No. 10-32UNF Output: CO2 plug (BNC plug)
Structure	Input/output connector connection, case ground
Case material	Stainless steel (SUS-303)
Operating temperature range	0～+50℃
Operating humidity range	85% RH or less
Outline drawings	Φ 15 × 40 mm
Weight	Approximately 20g
price

*1: At 160 Hz
*2: The gain at 160 Hz is set to 0 dB.
(Caution) The polarity of the output will be reversed.

Inquire about this product

Charge converter

CH-6130/CH-6140

Features

Specification

Download

Outline Drawings

Instruction Manual

Related Information