Acceleration detection related NP/GK/AU/CH/PS series
AU Series Signal Processing Amplifier Unit
GK Series Impulse Hammer
NP Series Accelerometer
- How strong is a 1G vibration, in terms of subjective feeling?
- Mounting Accelerometer to a high-temperature object
- What effect does the weight of Accelerometer have on the object being measured?
- Accelerometer output voltage polarity <It seems the acceleration output is inverted when using a charge amplifier?>
- The contents of the sensor-specific information (TEDS data) written to the TEDS-compatible accelerometer are:
- What happens to the output if the vibration pickup is mounted at an angle to the vibration surface?
- What is the lateral sensitivity of a single-axis Accelerometer?
- The signal from Accelerometer seems to be occasionally interrupted, sometimes resulting in a disconnection being detected or no signal being output at all.
- Points to note when using the NP-0021 Miniature/BNC Conversion Adapter
- When you want to convert from a miniature connector to a BNC connector
- Is the cable for Accelerometer repairable?
- Is it possible to take measurements at frequencies outside the NP-3110's operating frequency range (5Hz to 15kHz)?
- To convert the voltage signal from Accelerometer into velocity and displacement:
- Troubleshooting
- To convert the waveform value from Accelerometer to a vibration level:
- Regarding the use of NP-3210 wax
- Regarding the method of fixing Accelerometer
- Polarity of Accelerometer output voltage
- Will using Accelerometer in an alternating magnetic field affect it?