3-channel sensor amplifier
PS-1300
The PS-1300 can be used as a 3-channel sensor amplifier in combination with a 3-axis Accelerometer, and by using each channel independently, it can also be connected to a 1-axis Accelerometer.
The PS-1300 has a built-in integration function, which allows it to optimize the input signal to connected vibration data analysis equipment.
| Number of Channels | 3 | ||||||
|---|---|---|---|---|---|---|---|
|
Frequency response characteristics
|
*However, the value at 160Hz is set to 0 dB. |
||||||
|
accuracy
|
(At 160Hz, 25℃±3℃) |
||||||
|
Input connector
|
Miniature connector
|
||||||
|
Input voltage range
|
± 5 V max
|
||||||
|
Input-calculated noise
|
100 μVrms
|
||||||
|
Output connector
|
C02 (BNC)
|
||||||
|
Rated output voltage
|
±5 V max
|
||||||
|
constant current power supply
|
2.4 mA ± 20%
|
||||||
|
Output Impedance
|
Approximately 50 Ω
|
||||||
|
Load impedance
|
50 kΩ or more
|
||||||
|
Gain
|
|
||||||
|
Filter
|
HPF: through, 3 Hz, 10 Hz (3rd order Butterworth type -18 dB/oct)
LPF: through, 1 kHz, 10 kHz (3rd order Butterworth type -18 dB/oct) (10Hz and 1kHz conform to "Vibration of rotating machinery - Requirements for vibration severity measurement" <JIS B 0907-1989>) |
||||||
|
Power supply voltage
|
10V to 15VDC (AC 100V can be used with a separately sold AC adapter)
|
||||||
|
Current consumption
|
300 mA or less (at 12 VDC IN)
|
||||||
|
Usage environment
|
-10°C to +50°C, 90% RH or less (non-condensing)
|
||||||
|
Link
|
Up to 3 devices per AC adapter
|
||||||
|
Outline drawings
|
92 (W) × 121 (H) × 194 (D) mm (excluding protrusions)
 |
||||||
|
Weight
|
1 kg
|
||||||
|
Accessories
|
Joint cable, stabilizer, connecting brackets (2), rubber feet (4)
|
||||||
|
price
|
|||||||
|
Option
|
<Equipment Options>
|
*If you wish to install options after the main unit has been delivered, an additional installation fee will be required.